Lacp; Lacp Aggregation-Link Group <1-32> (Add|Set) Iflist; Lacp Aggregation-Link Group Delete Ifname - Asus GIGAX 2024M Cli Manual

LACP:

2.1 lacp aggregation-link group <1-32> (add|set)
IFLIST
GX2024B GROUPID range is 1-6
Syntax
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Example
2.2

lacp aggregation-link group delete IFNAME

Syntax
Parameters
Command Mode Configure terminal mode
GigaX2024B/M L2 Managed Switch CLI Manual
lacp aggregation-link trunk <1-32> (add|set) IFLIST
aggregation-link
<1-32>
add
set
PORTLIST valid format is port_id,[,port_id...],[-port_id,...],...
lacp aggregation-link group delete IFNAME
no lacp aggregation-link group <1-32>
show lacp [GROUPID]
No default lacp aggregation-link trunk group enable
This command sets the Link Aggregation Control Protocol (LACP)
operation add/set for the trunk group ports on the switch stack or
on a standalone switch.
ASUS(config)# lacp aggregation-link group <1-32> (add|set)
fa1/0/1-4
lacp aggregation-link group delete IFNAME
aggregation-link
group
delete
IFNAME
aggregation-link
GROUPID
append ports to lacp enabled port list
set lacp enabled port list for this group
aggregation-link
group
remove ports from lacp enabled port list
interface name
5