Tracelog Add (Dhcp-Snooping|Dot1X|Gvrp|Igmp-Snooping|Lacp|Stp); Tracelog Level (Critical | High | Low ) - Asus GIGAX 2024M Cli Manual

GigaX2024B/M L2 Managed Switch CLI Manual
Command Mode User mode, Privileged EXEC mode, Configure terminal mode,
No/clear
Show
Default
Description
Examples
19.16 t r a c e l o g
snooping|dot1x|gvrp|igmp-snooping|lacp|stp)
Syntax
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Examples

19.17 tracelog level (critical | high | low )

Syntax
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Examples
214
Interface mode
This command lists all of the command of the operation mode.
ASUS#list

tracelog add (dhcp-snooping|dot1x|gvrp|igmp-snooping|lacp|stp)

tracelog delete (dhcp-snooping|dot1x|gvrp|igmp-
snooping|lacp|stp)
Disable tracelog
This command starts the system logging the function.
ASUS(config)#tracelog add dot1x
tracelog level (critical | high | low )
The default is critical
This command is to decide how much message will be print.
ASUS(config)#tracelog level low
a d d ( d h c p -