Access-List (<100-199>|<2000-2699>) (Deny|Permit) Icmp Ipaddr Mask Host Ipaddr <0-255> [Ifname] - Asus GIGAX 2024M Cli Manual

Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Examples
13.119
(deny|permit) icmp IPADDR MASK host IPADDR
<0-255> [IFNAME]
Syntax
Parameters
GigaX2024B/M L2 Managed Switch CLI Manual
Access-list
<100-199>
<2000-2699>
range)
permit->
deny->
Icmp->
Any
Any
<0-255>
[IFNAME]
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp any
any <0-255> [IFNAME]
Show acces-lists [number|name]
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
ASUS(config)#access-list 100 permit icmp any any 1
access-list (<100-199>|<2000-2699>)
access-list (<100-199>|<2000-2699>) (deny|permit) icmp
IPADDR MASK host IPADDR <0-255> [IFNAME]
Access-list
<100-199>
<2000-2699>
range)
permit->
deny->
Add an access list entry
Extended IP access-list number
Extended IP access-list number (expanded
Specify packets to forward
Specify packets to reject.
Internet Control Message Protocol
Any Source host
Any destination host
ICMP message type
Egress interface name
Add an access list entry
Extended IP access-list number
Extended IP access-list number (expanded
Specify packets to forward
Specify packets to reject.
185