No Storm-Control (Broadcast|Dlf|Multicast) - Asus GIGAX 2024M Cli Manual

<1-262143>
Syntax
Parameters
Command Mode Interface mode (GX2024M)/ Configure terminal mode(GX2024B)
No/clear
Show
Default
Description
Example
9.2 no storm-control (broadcast|dlf|multicast)
Syntax
Parameters
Command Mode Interface mode
No/clear
Show
Default
Description
Example
GigaX2024B/M L2 Managed Switch CLI Manual
storm-control (broadcast|dlf|multicast) <1-262143>
broadcast
dlf
multicast
LIMIT_RATE

no storm-control (broadcast|dlf|multicast)

show storm-control IFNAME (broadcast|dlf|multicast)
None or depends on ODM customer
Use the storm-control configuration command on the switch
stack or standalone switch to set the limit rate of the port's total
bandwidth used by broadcast/dlf/multicast.
ASUS(config-if)# storm-control multicast 4096
no storm-control (broadcast|dlf|multicast)
broadcast
dlf
multicast
None or depends on ODM customer
Use the no storm-control configuration command on the switch
stack or standalone switch to disable the limit rate of the port's
total bandwidth used by broadcast/dlf/multicast.
ASUS(config-if)#no storm-control multicast
Broadcast packets
Destination Lookup Failure
Multicast packets
value 1~262143 (packets/s)
Broadcast packets
Destination Lookup Failure
Multicast packets
31