D Rtty Decode Set Mode - Icom IC-7600 Instruction Manual

Hide thumbs Also See for IC-7600:
Table of Contents

Advertisement

4
RECEIVE AND TRANSMIT

D RTTY decode set mode

This set mode is used to set the decode USOS func-
tion, time stamp setting, etc.
• Setting contents
q During RTTY mode operation, push [DECODE] (F-3)
to select RTTY decode screen.
w Push [<MENU1>] (F-1) to select the second RTTY
decode menu, then push [SET] (F-5) to select
RTTY decode set mode.
• Push [WIDE] (F-6) to toggle the screen size from nor-
mal and wide.
e Push [Y] (F-1) or [Z] (F-2) to select the desired
set item.
r Set the desired condition using the main dial.
• Push and hold [DEF] (F-4) for 1 sec. to select a default
condition or value.
• Push [Ω ≈] (F-3) to select the set contents for some
items.
t Push [EXIT/SET] to exit from set mode.
RTTY FFT Scope Averaging
Select the FFT scope waveform averaging function
from 2 to 4 and OFF. (default: OFF)
RTTY FFT Scope Waveform Color
Set the color for the FFT scope waveform.
• The color is set in RGB format.
• The set color is indicated in the box beside the RGB
scale.
RTTY Decode USOS
Turn the capability of letter code decoding after
receiving a "space" (USOS; UnShift On Space func-
tion) ON and OFF.
RTTY Docode New Line Code
Selects the new line code of the internal RTTY
decoder.
CR: Carriage Return, LF: Line Feed
RTTY Diddle
Selects the diddle condition.
51
DEF
F-1
F-2
F-3
F-4
F-1
F-3
<MENU1>
DECODE
• RTTY decode set mode screen
OFF
Recommendation!
If you use the FFT scope waveform for tuning, use
of the default or smaller averaging setting is recom-
mended.
51
• Push [Ω ≈] (F-3) to select R (Red), G (Green) and
B (Blue), and then rotate the main dial to set the
ratio from 0 to 255.
ON
• ON : Decode as letter code.
• OFF : Decode as character code.
CR,LF,CR+LF
• CR,LF,CR+LF : Makes new line with any codes.
• CR+LF
: Makes new line with CR+LF code
only.
BLANK
• OFF
: Turns the diddle function OFF.
• BLANK : Transmits blank code during no code
transmission.
• LTRS : Transmits letter code during no code
transmission.
SET
WIDE
F-5
F-6
Main dial
EXIT/SET
153
255

Advertisement

Table of Contents
loading

Table of Contents