D Load Option Set Mode - Icom IC-718 Instruction Manual

10
SET MODE

D Load option set mode

Load Contents
Selects file load condition from All and Select.
(default: Select)
ANT Memory
Selects the antenna memory setting loading condi-
tion from YES and NO. (default: NO)
REF Adjust
Selects the reference signal setting load condition
from YES and NO. (default: NO)
CI–V Address
Selects the IP address setting load condition from
YES and NO. (default: NO)
Other Memory & Settings
This setting is fixed "YES."
Voice TX Memory
Selects the voice TX message load condition from
YES and NO. (default: YES)
Voice RX Memory
Selects the voice RX message load condition from
YES and NO. (default: NO)
137
Select
• All : Loads and sets the all following contents.
• Select : Loads and sets the selected contents only.
NO
• YES : Loads and sets the antenna memory.
• NO : Use the original antenna memory setting.
NO
• YES : Loads and sets the reference signal setting.
• NO : Use the original reference signal setting.
NO
• YES : Loads and sets the IP address setting.
• NO : Use the original IP address setting.
YES
• YES : Loads and sets memory channel contents
and other settings.
YES
• YES : Loads and sets voice TX message.
• NO : Use the original voice TX message.
NO
• YES : Loads and sets voice RX message.
• NO : Use the original voice RX message.