Roland M-300 Owner's Manual Addendum page 19

About FADE section parameters
fig.fade-parameters.eps
1
3
1 USE FADE button
Selecting the check box enables the fade function.
2 Fade time
This sets the duration of the fade. You can set it up to a maximum of 100 seconds.
3 PAN
Selecting this check box enables the fade function for panning (or balance) as well.
Detailed settings for the Recall Filter feature
Using the detailed settings for the Recall Filter function lets you recall the following individually.
• CH1 - 32
• MAIN L, C, R
• AUX1 - 8
• MTX1 - 4
• DCA group 1 - 4
• MUTE group 1 - 4
• FX1 - 4
• GEQ1 - 4
• EXT FX1 - 4
Excluding a specific channel from scene recall
1.
At the SCENE MEMORY section, press [DISP].
The SCENE screen is displayed.
fig.scene-screen.eps
The RECALL PARAMETERS box in the scene list is displayed as shown below, depending on the state of the detailed settings for the Recall Filter function.
Display Meaning
Recall none.
Recall all.
Recall only some.
2
New functionality for scene memory
19