Roland M-300 Owner's Manual Addendum page 21

New functionality for monitoring
• A dimmer function has been added.
• Operations from the LEVEL knobs in the top panel's MONITOR section can be prohibited. This is useful when you want to want to keep the
monitor level unchanged during use.
MONITOR screen
fig.monitor-screen.eps
About MONITOR section parameters
fig.monitor-section.eps
1
4
6
1 MONITOR LEVEL CONTROL selection button
This lets you select either of the following as the operation performed by the monitor level.
• PANEL KNOB
Operation by the LEVEL knobs in the MONITOR section
• SCREEN
Prohibit operations from the LEVEL knobs in the MONITOR section, and permit on-screen operation
2 MONITOR LEVEL METER
This displays the output levels of MONITOR OUT L/R.
3 MONITOR LEVEL
This adjusts the monitor level within a range of -Inf to 10 dB. (Operation is possible only when SCREEN has been selected using
the MONITOR LEVEL CONTROL selection button.)
4 DIMMER button
This switches the dimmer function on or off.
5 DIMMER LEVEL
This adjusts the dimmer level within a range of -Inf to 0.0 dB.
6 TALKBACK DIMMER button
Selecting this check box interlinks on/off switching of the dimmer function with on/off switching of talkback.
When SCREEN has been selected using the MONITOR LEVEL CONTROL selection button, the fader for the MONITOR meter on the METER screen
can also be used to adjust the monitor level.
2
3
5
21