Roland M-300 Owner's Manual Addendum page 20

New functionality for scene memory
2.
From the scene list, select the target scene, then press [F4 (PARAM EDIT)].
This accesses the RECALL PARAMETER EDIT popup.
fig.recall-param-edit.eps
The RECALL PARAMETERS selection buttons are displayed as shown below, depending on the state of the detailed settings for the Recall Filter function.
3.
Press [F4 (DETAIL)].
The RECALL PARAMETER DETAIL popup appears.
fig.recall-detail.eps
4.
Press [F8 (CLOSE)] to close the RECALL PARAMETER DETAIL popup.
5.
Press [F1 (RECALL FILTER)] to activate.
6.
Press [F8 (OK)] to apply the changes and close the popup.
About Channel recall range setting button
Specify the channels to include in the recall range. Clearing a check mark excludes the item from scene recall.
Display Meaning
Recall none.
Recall all.
Recall only some.
In the case of , pressing [ENTER] displays the RECALL PARAMETER DETAIL popup.
20