Roland M-300 Owner's Manual Addendum page 27

Prohibit Specified Operations
You can edit the User Level in order to prohibit the specified operations.
* If you are operating the unit with ADMIN and desire to set user level with current user preference, create a new user setting according to the
steps below.
* It is not possible to prohibit any operations for the ADMIN user.
Creating a New User With the Same Settings as the Current User
1.
Connect a USB memory.
Connect a USB memory device to the USB MEMORY port of the M-300.
2.
Call up the USER screen.
Press the [DISP] button in USER section to call up the USER screen.
fig.user-screen.eps
3.
Call up the CREATE NEW USER popup.
Press [F2 (CREATE USER)] to call the CREATE NEW USER popup.
fig.create-new-user.eps
4.
Edit the user name.
Edit the user name in USER NAME field.
5.
Make it to copy the current settings.
Check the [Copy current user settings] box and make the unit to copy current user settings to the new one.
6.
Create a new user setting.
Press [F8 (CREATE)] to create a setting. A new user with the same settings as the current user will be created in the USB memory.
7.
Enable the new user setting.
Select the newly created user setting in user list and press [F1 (CHANGE USER)]. The user setting will become active.
New functionality for User Settings
27