Roland M-300 Owner's Manual Addendum page 16

About the 31-band GEQ
Accessing the GEQ EDIT popup
1.
Access the EFFECTS screen, and press [F2 (GEQ1 - 4)] to access the GEQ 1 - 4 tabs.
fig.GEQ-Rack.eps
2.
Press [F5 (EDIT GEQ1)] - [F8 (EDIT GEQ4)] depending on the GEQ you want to use.
fig.GEQ-Edit.eps
The GEQ EDIT popup will appear.
You can also configure a USER button to directly access the popup.
Using the top panel faders to control the GEQ
You can use the top panel faders to control the GEQ.
Press [F5(20-640 ON FADER)], [F6(125-4k ON FADER)] or [F7(640-20k ON FADER)] and turn on.
The corresponding fader range will be shown on the screen and you can operate the GEQ using the top panel faders.
fig.GEQ-Fader-Guide.eps
If a fader's position is anything other than 0 dB, the corresponding [MUTE] will blink. When you press the blinking [MUTE], the fader will be reset
to the 0 dB position.
16