Roland M-300 Owner's Manual Addendum page 17

Using the GEQ library
You can recall 31-band GEQ settings from the library, and store the current 31-band GEQ settings in the library. GEQ library
operations are performed in the GEQ LIBRARY popup.
1.
Access the GEQ EDIT popup for the GEQ unit that is the target of GEQ LIBRARY operations.
fig.GEQ-Edit.eps
2.
Press [F5 (LIBRARY)].
The GEQ LIBRARY popup will appear.
fig.GEQ-Lib-Guide.eps
A. Applicable GEQ indication
This indicates the effect to which the GEQ LIBRARY popup applies.
B. Library data list
This is a list of the library data.
About the Function Buttons
In the GEQ LIBRARY popup, the function buttons perform the following operations.
• [F2 (PREVIEW)] Press this to preview the selected library data.
• [F3 (NAME EDIT)] This calls up the NAME EDIT popup.
• [F4 (RECALL)] This recalls the selected library data.
• [F5 (STORE)] This stores to the selected library data.
• [F6 (CLEAR)] This clears the selected library data.
• [F7 (LOCK)] This locks the selected library data.
• [F8 (CLOSE)] This closes the popup.
For details on library operations, refer to "Library operations" in the owner's manual.
Noise may occur while previewing or recalling the library, but this is not a malfunction.
About the 31-band GEQ
17