Transmitting And Receiving; What Documents Can Be Inserted In The Adf - Olivetti OFX 800 User Manual

Professional ink jet fax
Table of Contents

Advertisement

TRANSMITTING AND RECEIVING

Now that your fax machine has a name and a num-
ber, you can use it to:
transmit documents (also in delayed mode, or
using the polling method),
receive documents (also using the polling
method),
make telephone calls (see the "Using the fax
machine as a telephone").
From now on to simplify the procedure described,
the following graphic representations will be used at
the beginning of each procedure:
Press this key once
Insert the document with the
side to be sent or copied face
down.
Lift the receiver.
Replace the receiver.
Dial on the numeric keypad.
Press a one-touch dialling key.
Incoming call
WHAT DOCUMENTS CAN BE INSERTED IN
THE ADF
Formats
A4 210 x 297 mm
US Letter 216 x 279 mm
US Legal 216 x 356 mm
14
Press the phone book
key and enter a speed
dialling code.
Dimensions
Width min. 90 mm - max. 216 mm
Length min. 90 mm - max. 600 mm
Thickness
From:
60 – 80 g/m
(max. 30 sheets)
2
50 – 340 g/m
2
(1 sheet at a time)
For originals differing from specified formats, use the
document holder.
Recommendations
In order to avoid damaging your fax machine and/or
invalidating the guarantee, make sure that the docu-
ments you use do not contain:
staples
paper clips
adhesive tape
correction fluid or wet glue.
NEVER USE ORIGINALS THAT ARE
curled
torn
too small
carbon paper.
In all these cases, you must either photocopy the
document and then transmit the copy, or use the
appropriate document holder.
T
too thin
wet or damp
crumpled
RANSMITTING AND RECEIVING

Advertisement

Table of Contents
loading

Table of Contents