Network Setup - Honeywell FUSION III DVR User Manual

FUSION III DVR Digital Recording and Transmission System
5.8

NETWORK SETUP

CAUTION: Do not join this DVR to a Network Domain. Domains force
policies that can negatively affect the DVR. More importantly, by default,
the user must press CTRL-ALT-DEL to login; this Keyboard combination
is disabled and the software will not be able to load.
1
2
3
4
5–28
Disable Remote
Control
Time Out Value
Emergency Port
Center Port
This setting enables or disables access to the DVR
from remote connections.
When a user attempts to connect to the DVR and the
connection does not succeed during the timeout
period designated, the connection will be terminated.
The Emergency Port is the port used to connect with
the Alarm Monitor software. If connecting through a
firewall, this port must be opened to incoming and
outgoing traffic.
The Center Port is the port used to connect to the
Fusion Remote Software. This is the Port that must be
specified inside the Fusion Remote software to
connect to the DVR. If connecting through a firewall,
this port must be opened to incoming and outgoing
traffic.