Regular Interval Recording - Honeywell FUSION III DVR User Manual

FUSION III DVR Digital Recording and Transmission System

5.3.3 REGULAR INTERVAL RECORDING

To enable regular Interval Recording on Motion follow these steps:
Motion
1. Setup a camera to record on motion.
2. Place a check in the Regular Interval Recording box.
3. Specify how often to take an image when no motion is occurring. You can go as
little as 1 image per second.
To enable regular Interval Recording on a Sensor Event follow these steps:
Sensor
1. Setup a camera to record on motion.
2. Delete the motion grid on the selected camera. This will cause the camera to never
be triggered by a Motion event.
3. Associate a Sensor to the selected camera, and set the schedule. Sensor
Recording supersedes all other types of recording. When a sensor event occurs,
the camera will begin recording.
4. Place a check in the Regular Interval Recording box.
5. Specify how often to take an image when no motion is occurring. You can go as
little as 1 image per second.
5–6