Intensive Recording Overview; How To Use Intensive Recording - Honeywell FUSION III DVR User Manual

5.4.2 INTENSIVE RECORDING OVERVIEW

The Intensive Recording Option allows increasing of the Pictures Per Second and the
resolution of any camera recording using sensor activation.
1
2

5.4.3 HOW TO USE INTENSIVE RECORDING

The Intensive Recording option is set up as an 'All or Nothing'. This means that once
enabled (associated with sensors), all cameras that are associated with sensors will
activate the Intensive Recording.
To activate the Intensive Recording option, follow these steps.
Activating
Intensive
1. Inside Setup, select the desired camera to use and then enable the appropriate
Recording
sensor associated to it.
2. Open the Intensive Recording Options. Enable the Intensive-On-Sensor option
and then select the desired Pictures Per Second for both the Intensive and Non-
Intensive Channels. Resolution and holding duration may also be adjusted for the
Intensive Channel.
3. Close the Intensive Recording window by selecting the Apply button.
4. Open the Sensors and Outputs window and enable the sensor that was
associated with the Intensive Recording by placing a check in the box next to it
5. Press the Apply button and exit out of setup.
Enable Intensive
Recording Sensor
Enable Intensive
Recording Motion
Enables intensive recording on sensor events.
Enables intensive recording on motion events.
SETUP OPTIONS
5–9