Table of Contents
Advertisement
FUSION III DVR Digital Recording and Transmission System
7. Once enabled, the Protocol can be edited. Select the appropriate Protocol.
NOTE: Protocols are a set of instructions written by the manufacture of the PTZ
8. Press Apply and exit Setup.
9. From the Main Display Screen select the PTZ button (See Section 4.3 – Display
Screen.) The PTZ Control options open.
10. Select the PTZ camera to control by clicking on its video on the main display
screen. The camera number will appear inside the PTZ controls.
11. Using the PTZ controls, you should now be able to move the PTZ around.
7–2
cameras that allow software programs such as this DVR to control their
functions. The majority of the well established PTZ manufacturers' protocols
are included in this software.
RS485
Signal Line (-)
Signal Line (+)
Ground
RX LED
TX LED
Operation
LED
Advertisement
Table of Contents
