Setting Up The Network; Figure 3-21 Network Menu; Figure 3-22 Network Setup Screen - Honeywell HRSD40F User Manual

Setting Up the Network

1.
2.
Setting the Network Transfer Speed
Transfer Speed is the number of images that can be transferred per second for each
camera. You can configure the transfer speed and the unit of measure for the transfer
speed.
To select the transfer speed
1.
2.
3.
To choose the transfer speed unit of measure
1.
56
Use the Left and Right arrow buttons on the front panel to navigate to the
Network Menu.
Figure 3-21
Select Network and press
Figure 3-22
Select the first field beside Transfer Speed, then press
Use the Up and Down arrows to select a transfer speed from 50Kbps to 100Mbps.
Press to select the transfer speed.
Select the second field beside Transfer Speed, then press
field.
Network Menu
. The Network Setup Screen appears.
Network Setup Screen
HRSD40F DVR User Guide
to activate that field.
to activate that