Configuring The Dvr Server To Accept Remote Connections - Honeywell FUSION III DVR User Manual

FUSION III DVR Digital Recording and Transmission System
1
2
3

14.1.1 CONFIGURING THE DVR SERVER TO ACCEPT REMOTE CONNECTIONS

1. Enter Setup on the DVR unit.
2. Open the Network menu.
3. Uncheck the Disable Remote Control option.
Adjust port settings if necessary.
NOTE: If using a Firewall, it may be necessary to adjust the port settings on both the
4. Check the Enable Web Viewer option.
Again, adjust port settings if necessary
5. Press OK.
6. Make sure a User account is created.
Without a user account, the Administrator account must be used.
The DVR server is now ready to receive incoming connections.
14–2
3
Allows view of one or more sets of cameras at a time.
Screen Division
They are organized in several different groups such as
Buttons
1x1, 4x4, and 8x8.
Activates the commands
GO!
Enable or disable selected cameras for use when
Camera Buttons
searching.
DVR and the Firewall. Contact the Network Administrator for more
information.
1
2