FUSION III DVR Digital Recording and Transmission System
2. Click Camera Setup
3. Click the Registration button
4. In the Network Device Authentication, the System ID can be located under the
4.3.1 OBTAINING THE UNLOCK CODE
1. Open an Internet browsing software and go to:
2. Enter the Product Serial Number that was provided by Honeywell
3. Enter the System ID that was generated by your unit.
4. Click Submit
5. Verify the Information
6. Click Next if the information provided is correct
4–2
"Add a new Serial Key" section (shown below)
http://registration.fusiondvrsupport.com/honeywell/Registration/SWregistration.aspx