Connecting Control Outputs To The Dvr - Honeywell FUSION III DVR User Manual

3.10

CONNECTING CONTROL OUTPUTS TO THE DVR

Each DVR unit may have up to 16 Control Outputs. These outputs can be used to
trigger devices such as Sirens, Phone Dialers, Lights, and any other relay activated
device.
Control
Output
•
Use 12V, below 300mA. For controlling lights or other high current devices, use an
external relay.
•
Maximum voltage is 24V AC @ 1 amp
•
Output uses a Form C Relay (NC-C-NC)
GETTING STARTED
3–7