Table of Contents
Advertisement
5.2.1 CONNECTING A NETWORK DEVICE
1. Select the camera channel you plan
to add a Network Device to.
2. Check the Use Network Device Box
3. If your Network Device supports PTZ
check the Enable Network Device
PTZ Box.
4. Click Setup Network Device and the
Network Device Properties window
will appear.
5. Click Setup to begin adding a
Network Device.
6. Select the Manufacturer and Model of
camera you are adding then click
next.
7. Enter the IP Address, Port, ID, and
Password of the Network Device and
click Finish.
8. Click OK when you are returned to
the main Network Device Propertied
window and click OK to exit the main
setup window.
Your Network Device has now been
9.
added.
SETUP OPTIONS
5–3
Advertisement
Table of Contents
