Using The Databases - Garmin West Marine 276C Plus Owner's Manual

G S > U
ETTING TARTED SING THE
To enter data in a data field:
1. Use the Rocker key to highlight the desired data field and
press ENTER to activate the field.
2. Press Up or Down on the Rocker key to select characters.
Press Right to move to the next character or press Left to
move back to the previous character. If there are two lines of
data, keep pressing Right to drop to the next line.
3. After entering the desired data, press ENTER.
TIP: To clear the entire data field, highlight the left-most
character field and press Left once more on the Rocker key.
Not all fields are programmable. When you are on a page with fields
that are not selectable, the highlight skips over them.
10
190-00501-00_0A.indd 10
276C P
LUS
Entering data

Using the Databases

Optional Garmin Data Cards and MapSource CD-ROMs enhance
the versatility of your 276C Plus. With optional MapSource City
Select data, you can view listings of nearby restaurants, lodging,
shopping centers, attractions and entertainment, and even retrieve
addresses and phone numbers for any listed location.
The included USB Interface Cable or an optional PC Interface Cable
(with a serial connector) is used to transfer MapSource CD-ROM
data to the optional Data Card.
Refer to the Garmin Web site at http://www.garmin.com/
cartography/ for compatible MapSource products.
276C Plus Owner's Manual
1/13/2005 10:43:26 AM