Adding And Editing Stops (Via Points) - Garmin West Marine 276C Plus Owner's Manual

Adding and Editing Stops (Via Points)

You can add via points, or extra stops, to your route using Edit Vias.
Via points are great for adding a stop at the gas station or bank to
your route and are really helpful when planning a long trip.
To add via points to your route:
1. While navigating your route, press the NAV key to open the
Navigate Menu.
2. Use the Rocker key to select Edit Vias and press ENTER.
3. The Add/Edit Vias window opens. Highlight Add Via Point
and press ENTER.
Add/Edit Vias Page
Showing the original route without via points
276C Plus Owner's Manual
190-00501-00_0A.indd 65
B O L M
ASIC PERATION IN THE AND ODES
4. From the pop-up window, highlight either Use Map or Use
Find Menu and press ENTER.
a. If you selected Use Map, use the Rocker key to select
the desired item on the map and press ENTER.
b. If you selected Use Find Menu, select an item from
the Find Menu as discussed in the "Finding an Item"
beginning on page 15. Remember you can press MENU
while the Find Menu is open to find an item near another
location, such as your route destination.
5. The new point is added to the route as displayed in the Add/
Edit Vias page. Continue steps 3 through 4 until you have
added all of the via points that you want. Highlight Done and
press ENTER to apply the new via points to the route.
> N A M
AVIGATING IN UTOMOTIVE ODE
65
1/13/2005 10:43:49 AM