Managing Your Tracks; Setting Up And Saving Your Tracks - Garmin West Marine 276C Plus Owner's Manual

B O > M
ASIC PERATION ANAGING

Managing Your Tracks

The 276C Plus draws an electronic breadcrumb trail or "track log"
on the Map page as you travel. The track log contains points along
its path that include time and position data.
The track log starts recording as soon as the 276C Plus gets a
location fix. For the best results, clear the track log before you
start traveling because when the track log is full, new track points
overwrite the oldest track points.
The percentage of memory used by the current track log appears at
the top of the Active tab. After the track log is cleared, it displays
zero percent. When the display reaches 100%, the most recent track
points start to overwrite the least recent track points (if Wrap is
selected for Record Mode). To avoid losing track points, save the
track log when it approaches the 99% mark.
You must first save the track log before you can use the Navigate
Track feature. The Save feature allows you to store up to 15 track
logs from certain times and dates.
To access the Track tab:
1. Press Menu twice to open the Main Menu.
2. Highlight Track from the vertical list of tabs.
32
190-00501-00_0A.indd 32
Y T
OUR RACKS

Setting up and Saving your Tracks

Active Track Tab
Record Mode—Wrap records over the oldest tracks when the track
log reaches 100%. Fill records a track log until the track log is full
(100%). When Off is selected, the unit does not record tracks.
Interval—Distance records track points after a specified distance
has been traveled. Time creates track points after a specified
time has elapsed. Resolution records track points based upon the
resolution. If you enter a higher resolution, the unit creates more
points in the track.
Value—records a track according to the Interval and Value. Enter a
specific distance, time, or resolution.
Color—select a color for the track when it is displayed on the map.
276C Plus Owner's Manual
1/13/2005 10:43:34 AM