Garmin West Marine 276C Plus Owner's Manual page 39

To add a proximity waypoint:
1. Press MENU twice to open the Main Menu.
2. Highlight Points from the vertical list of tabs. Highlight
Proximity from the row of tabs along the top of the screen.
3. Use the Rocker key to highlight an empty line on the
Proximity List and press ENTER. The Find Menu appears.
4. Select the desired waypoint or point of interest from the Find
Menu. With OK highlighted, press ENTER to select that
point. (For complete information about selecting waypoints or
points of interest from the Find Menu, see "Finding an Item"
on page 15).
5. The distance field is now highlighted. Press ENTER to begin
entering the proximity radius.
6. Use the Rocker key to enter a distance value (up to 99.99
units) and press ENTER.
To turn proximity alarms on or off:
1. Press MENU twice to open the Main Menu.
2. Highlight Points from the vertical list of tabs. Highlight
Proximity from the row of tabs along the top of the screen.
3. Use the Rocker key to highlight the field below Proximity
Alarm and press ENTER.
4. Select the desired On or Off setting and press ENTER.
276C Plus Owner's Manual
190-00501-00_0A.indd 31
B O
ASIC PERATION
To clear one or all proximity waypoints from the list:
1. Press MENU twice to open the Main Menu.
2. Highlight Points from the vertical list of tabs. Highlight
Proximity from the row of tabs along the top of the screen.
3. Use the Rocker key to highlight the proximity waypoint to
clear and press MENU.
Proximity Points Tab Options Menu
4. To clear a single alarm, highlight Remove Point and press
ENTER. To clear all proximity waypoints, select Remove All
and press ENTER.
5. Use the Rocker key to highlight OK and press ENTER to
confirm.
> C U W
REATING AND SING AYPOINTS
31
1/13/2005 10:43:34 AM