Navigating In The Sea Modes; Initiating Navigation - Garmin West Marine 276C Plus Owner's Manual

Navigating in the Sea Modes

You can begin navigating to a point in several ways:
• Select a point on the map and press the NAV key.
• Press the NAV key to activate a new route using the Find
Menu, or activate a saved route or track.
• Press the FIND key to search for a particular item and create
a route to it.
Once you are actively navigating, you will see a magenta line that
always runs from your current location to the destination on the Map
page. You can use many pages in the 276C Plus to help navigate to
your destination, such as the Map, Compass, and Highway pages.
Accessed by pressing NAV/MOB key
276C Plus Owner's Manual
190-00501-00_0A.indd 37
Navigate Menu
B O S M
ASIC PERATION IN THE EA

Initiating Navigation

Press the NAV key to open the Navigate Menu:
Go To Point—allows you to select a waypoint or point of interest
from the Find Menu to navigate to.
Navigate Route—allows you to select a route to navigate. You can
also activate a saved route through the Routes tab of the Main Menu.
For information about routes, refer to the "Creating and Using
Routes" section beginning on page 17.
Navigate Track (TracBack)—allows you to select a saved track
to navigate. You can also activate a saved track through the Track
tab of the Main Menu. For information about tracks, refer to the
"Mangaing Your Tracks" section beginning on page 32.
MOB (Man OverBoard)—creates a Man OverBoard waypoint and
navigates to that location.
> N S M
ODES AVIGATING IN THE EA ODES
37
1/13/2005 10:43:37 AM