Using Ximage For Customized Waypoint Icons; Installing And Removing Data Cards - Garmin West Marine 276C Plus Owner's Manual

Using xImage for Customized Waypoint Icons

xImage allows you to exchange images between your PC and
your 276C Plus. You can download and save screen shots of any
screen displayed on your unit. xImage also allows you to download
customizable splash screens and waypoint symbols from compatible
GPS units, customize them (if you have an image editing program
on your PC), and send them back to your GPS unit.
You can download xImage from the Garmin Web site at http://www.
garmin.com/ximage/. Refer to the help file for complete instructions
about using xImage.

Installing and Removing Data Cards

The 276C Plus uses an optional Garmin data card to display digital
charts and maps or save user data. Install the data card in the card
slot located on the bottom of the unit. Install or remove the data card
at any time, whether the unit is on or off.
You can load a variety of information on your data card, such as
BlueChart and MapSource detailed maps, and waypoint, route, and
track information saved in a MapSource program. You can also buy
pre-programmed cards to use with your 276C Plus.
Data cards are not waterproof, should not be exposed to moisture or
excessive static charges, and should be stored in the case supplied
with the card.
276C Plus Owner's Manual
190-00501-00_0A.indd 111
To install a data card:
1. Insert the card into the slot on the bottom of the unit. Be sure
the label is facing the front of the unit.
2. Firmly push the card into the unit. It is not necessary to force
the card. The handle is still exposed when it is properly
inserted.
3. If the unit is on, a confirmation tone sounds. The first time
you insert a programmed data card, the unit takes a few
seconds to read the card. Once the data card has been
properly installed and accepted, a summary screen noting
the card details appears. Press ENTER to acknowledge.
If you insert a data card and get a card format not recognized
message, try removing the card and reinserting it. If the card is still
not recognized, contact Garmin or your Garmin dealer.
To remove a data card:
1. Grasp the card handle. The handle expands for easy
removal.
2. Pull the card out of the card slot on the bottom of the unit.
3. If the unit is on, a confirmation tone sounds when the data
card has been removed.
A > I I
PPENDIX NSTALLATION NFORMATION
111
1/13/2005 10:44:11 AM