Customizing The Units; Restoring Defaults - Garmin West Marine 276C Plus Owner's Manual

Customizing the Units

The Units tab allows you to customize measurement units for the
entire system. To open the Units tab, press MENU twice to open
the Main Menu. Select Setup from the vertical tab list. Then select
Units from the row of tabs along the top of the page.
Distance and Speed—select the units to display speed and distance
traveled.
Direction Display—select the units to display direction. Mils is a
unit of angle measurement used in military settings, in which 17.78
mils equal one degree.
Temperature—select the units to display temperature.
Elevation—select the units to display altitude.
Depth—select the units to display depth.
276C Plus Owner's Manual
190-00501-00_0A.indd 87
Setup Units Tab
C Y 276C P
USTOMIZING OUR

Restoring Defaults

The following tabs in the Main Menu allow you to restore their
defaults: Track, Alarms, Display, Sound, Setup, and Page Sequence.
Setup Tab Options Menu
To restore defaults:
1. Press MENU twice to open the Main Menu.
2. Use the Rocker key to highlight the desired tab.
3. Press Menu to open the options menu.
4. Highlight Restore Default.
5. Press ENTER to restore the tab to the defaults.
To restore all of unit's settings to the factory defaults at once, select
All Unit Defaults from the options menu of the Setup tab.
> S S
LUS ETTING UP THE YSTEM
87
1/13/2005 10:43:57 AM