Creating A Waypoint Using The Map - Garmin West Marine 276C Plus Owner's Manual

B O > C
ASIC PERATION REATING AND

Creating a Waypoint Using the Map

You can quickly create a waypoint using the Map page. When you
pan the map and move the arrow over a map item, you will see a
highlighted description of that item. The 276C Plus uses the map
item text shown on the map as the default name and symbol for the
new waypoint.
To create a new waypoint using the Map page:
1. Press PAGE or QUIT until the Map page is displayed.
2. Use the Rocker key to move the arrow to the desired map
position or map feature.
3. Press and quickly release ENTER/MARK to capture the
arrow position. Pressing and holding ENTER/MARK marks
your present position, not the arrow's location.
4. If you have highlighted a map feature, an information page
appears after you press ENTER. Use the Rocker key to
highlight Save and press ENTER to save the item as a
waypoint.
22
190-00501-00_0A.indd 22
U W
SING AYPOINTS
Map Feature Information Page
Select Save to save feature as a waypoint.
5. The New Map Waypoint page appears. To accept the
waypoint with the default information, highlight OK and press
ENTER.
6. To change any information on the New Map Waypoint page,
highlight the appropriate field and press ENTER. After
entering your changes, highlight OK and press ENTER.
276C Plus Owner's Manual
1/13/2005 10:43:30 AM