Configuring The Nec Snmp Agent For Windows Nt - NEC POWERMATE 8100 Series Service And Reference Manual

Note:
NEC SNMP Desktop Manager and HP OpenView, IP
addresses (for example, 157.123.176.100) must be entered
in the Traps for "Public Community" to receive traps from the
NEC SNMP agents.
For the NEC SNMP Agent to send a trap to the NEC SNMP
Desktop Manager, the port number can be configured from
the registry: "HKEY_LOCAL_MACHINE\SOFTWARE\NEC
Computer Systems Division\NEC SNMP Desktop
Agent\Port Number". The default port number is set to
55593.
T
Internet MIB (RFC 1156) — Allows the user to specify a contact name
and location for the Internet MIB.
4. Check each policy required and highlight the policy name.
T
For Communities, Traps, and Permitted Managers, click
configure the policy as appropriate.
T
Highlighting the
location fields in the Policy window for editing.
T
Click
T
Click

Configuring the NEC SNMP Agent for Windows NT

Configure the NEC SNMP Agent for Windows NT as follows.
1. In the Windows taskbar, click
.
Panel
2. At the Control Panel, double click the
3. At the Network screen, click the
4. At the Select Network Services screen, highlight
OK .
5. At the Microsoft SNMP Properties screen, there are three properties that
must be set:
T
Security — Limits the set of computers than can perform SNMP
management on this computer to those in the community and/or specific
computer names the user provides.
T
Traps — Limits the set of computers that receive traps from this
computer to those in the community and/or specific computer names the
user provides.
2-34 System Configuration
For an SNMP management console, such as the
Internet MIB
File and click Save .
and click .
File Exit
Start
policy opens the contact name and
, point to Settings, and click
icon.
Network
Services tab and click
SNMP Service
Show and
Control
Add .
, and click