Nec Webtelligent Installation - NEC POWERMATE 8100 Series Service And Reference Manual

Double click one or more entry in the list of applications and online
documents. A check mark should appear to the left of each entry that is
double clicked. To deselect an entry, double click it again so that the check
mark disappears.
4. Click
OK
appears for each application selected.
5. When the installation completes, choose
CD-ROM drive. Click
6. Repeat steps 2 through 5 for each option or set of options to be installed.

NEC WebTelligent Installation

Install the NEC WebTelligent software and the NEC Auto Discovery Agent
software on a Windows 98, Windows 95, or Windows NT web server as
follows.
Note:
WebTelligent Installation" in the printed PowerMate 8100
Series User's Guide.
1. Close all open applications before installing WebTelligent and Auto
Discovery Agent.
2. Install web server software on a machine with a host name such as
PowerMate-A
T
Install your web server software - Microsoft Personal Web Server or
other software.
T
On the Windows desktop, click
Control Panel
T
At the Control Panel, double click
T
In Personal Web Server, click the
T
In Administration, click
If the web browser does not start, click the
click the
browser.
3. Install the NEC WebTelligent software using the NEC Select Install CD.
Insert the NEC Select Install CD into the CD-ROM drive. Click
the screen.
4. Click
Start
E:\NECUtil\WebTelig\Admin\setup.exe
drive.
. The application files reload sequentially, and a progress bar
OK at the Reminder to remove the CD.
This section replaces the section "NEC
. Set up the web server as follows.
.
Administration
tab, and click
Administration
on the taskbar, point to and click
. Remove the CD from the
Restart
, point to
Start Settings
Personal Web Server
tab.
Administration
to start your web browser.
tab, click
Startup
Administration
, and type
Run
where E: represents the CD-ROM
Release Notes A-13
, and click
.
,
Start
to start the
in
Cancel