Video Configuration; Resource Configuration - NEC POWERMATE 8100 Series Service And Reference Manual

Menu Item
Mark DMI Events as Read

Video Configuration

This menu is used to set video palette snooping and AGP Aperture size fields.
Use the fields in the following table to set the video configuration.
Menu Item
Palette Snooping
AGP Aperture Size

Resource Configuration

This menu is used to set resource configurations. Use the fields in the following
table to set the resource configurations.
Menu Item
IRQ3
IRQ4
IRQ5
IRQ7
IRQ10
IRQ11
IRQ14**
IRQ15**
2-18 System Configuration
DMI Event Logging
Settings and Descriptions
[Enter]
Press Enter to bring up the dialog box asking for
confirmation that the events should be marked as read.
If no events have been logged, the Mark DMI Events As
Read field is read-only.
Video Configuration
Settings and Descriptions
Settings: Disabled (default), Enabled.
Sets palette snooping (RAMDAC shadowing) to Enabled when
ISA graphics device installed under following conditions:
An ISA board connects to the PCI graphics board via the VESA
compatible feature connector.
The ISA board connects to a color monitor.
The board used the RAMDAC on the PCI board.
The palette snooping feature is broken on the PCI board.
Settings: 64 MB (default), 256 MB.
Sets the amount of memory to be shared between graphics and
system functions.
Resource Configuration
Settings and Descriptions
Settings: Available (default), Reserved.
An Available setting for any IRQ indicates that the specified IRQ
is available on the system. A Reserved setting indicates that the
specified IRQ is reserved for use by Legacy ISA devices.
** This option appears only if the secondary IDE channel is
disabled.