Inside Features; Inside The Desktop System - NEC POWERMATE 8100 Series Service And Reference Manual

T
Printer port — Attach a parallel printer with a 25-pin connector to this
port.
T
VGA monitor connector — Attach a video graphics array
(VGA)-compatible monitor (NEC MultiSync
monitor or other VGA-compatible monitor) with a 15-pin connector to
this AGP board connector.
T
Expansion board slots — Use these slots to install up to three optional
boards (graphics, fax/modem, SCSI) in the system.
T
Fax/modem port — Some systems come with a 56-Kbps fax/modem
board in an expansion slot. The board allows the connection of a phone
line to the system for fax and data communications.

Inside Features

The following figure shows the interior of the desktop system, with callouts to
the major areas of the model. A list of features follows the figure.
A – System Board
B – AGP Board
C – Expansion Board Slots
The inside of the system has the following features:
T
system board with connectors for the Celeron, Pentium II, or Pentium III
processor, DIMM memory, AGP board, and external devices
T
riser board with two IDE connectors, diskette drive connector, expansion
board connectors, and internal signal and power connectors
T
AGP board (a built-to-order component)
T
3Com 3C905-B-TX-L-100 network board
T
two accessible 5 1/4-inch bays for expansion

Inside the Desktop System

®
monitor, NEC VistaScan
D – Riser Board
E – Internal Device Slot
F – Accessible Device Slots
System Overview 1-7
™