Boot Menu Options - NEC POWERMATE 8100 Series Service And Reference Manual

Menu Item
System Backup Reminder
Fixed Disk Boot Sector
After Power Failure
Floppy Check
On Modem Ring
On LAN
On PME
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Fifth Boot Device
2-22 System Configuration

Boot Menu Options

Settings and Descriptions
Settings: Disabled (default), Daily, Weekly, Monthly.
When set to Daily, Weekly, or Monthly, the system displays a
system backup reminder message during boot up.
Settings: Normal (default), Write Protect.
When set to Write Protect, the fixed disk boot sector is write-
protected against viruses.
Settings: Power On, Stay Off, Last State (default).
When After Power Failure is set to Power On, the system
powers on after a power failure. With the Stay Off setting, the
system does not power on after a power failure. With the Last
State setting, the system powers on only if it was powered on
when the power failure occurred.
If the After Power Failure field is set to Stay Off, the On LAN
boot option does not work, even if the On LAN field is set to
Enabled.
Settings: Enabled (default), Disabled
Settings: Power On (default), Stay Off.
Enables an external modem to work even when the system is
in a power reduction state. Full power is restored to the system
so it can receive the modem ring when the setting is Power
On.
Settings: Power On (default), Stay Off
Enables the system to be contacted via a LAN even when in a
power reduction state. On LAN does not work if the After
Power Failure option is set to Stay Off.
Settings: Stay Off (default), Power On
Controls how the system responds to a PCI Power
Management Enable (PME) wake up event.
Select a boot device from the option list with the up or down
arrow, then press the plus or minus key to change the device
boot order.
The Fifth Boot Device option only appears when an Intel Pro
100 LAN board is installed.
Example:
Removable Devices
ATAPI CD-ROM Drive
Hard Drive
Network Boot
MBA