3. Slide the processor into the retention mechanism until it is seated firmly in
the processor socket.
Aligning the Pentium II Fasteners
A – CPU/Heat Sink
B – Retention mechanism
4. Secure the processor by locking the tabs at both ends of the processor in the
retention mechanism.
5. Slide the top bar over the bottom bar to secure the heat sink.
Installing a Pentium II in a Retention Mechanism with Fasteners
A – Locking Tabs
B – CPU/Heat Sink
C – Retention Mechanism
6. Reconnect cables that were disconnected to gain access to the processor
socket.
C – Bottom Bar
D – System Board
D – System Board
E – Bottom Bar
F – Top Bar
Disassembly and Reassembly 3-21