Table of Contents
Advertisement
Permitted Managers — Limits the set of SNMP management
!
applications that can access this computer to those with the IP or
IPX addresses that the user provides.
Traps for "Public" Community — Limits the set of computers
!
that receive traps from this computer to those with the IP or IPX
addresses that the user provides.
Note
For an SNMP management console, such as the NEC SNMP
Desktop Manager and HP OpenView, IP addresses (for example,
157.123.176.100) must be entered in the Traps for "Public Community" to
receive traps from the NEC SNMP agents.
For the NEC SNMP Agent to send a trap to the NEC SNMP Desktop
Manager, the port number can be configured from the registry:
"HKEY_LOCAL_MACHINE\SOFTWARE\
NEC Computer Systems Division\NEC SNMP Desktop Agent\Port
Number". The default port number is set to 55593.
Internet MIB (RFC 1156) — Allows the user to specify a contact
!
name and location for the Internet MIB.
Check each policy required and highlight the policy name.
4.
For Communities, Traps, and Permitted Managers, click Show
!
and configure the policy as appropriate.
Highlighting the Internet MIB policy opens the contact name
!
and location fields in the Policy window for editing.
Click File and click Save.
!
Click File and click Exit.
!
Configuring the NEC SNMP Agent for
Windows NT
Configure the NEC SNMP Agent for Windows NT as follows.
In the Windows taskbar, click Start, point to Settings, and click
1.
Control Panel.
At the Control Panel, double click the Network icon.
2.
At the Network screen, click the Services tab and click Add.
3.
4-12 Managing System Resources
Advertisement
Table of Contents
