Code 39 Code Page; Interleaved 2 Of 5; Check Digit - Hand Held Products HANDHELD 3800G User Manual

Code 39 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created from the chart, Code Page
Mapping of Printed Bar Codes on page A-4, and scan the value and the SAVE
bar code from the Programming Chart inside the back cover of this manual. The
data characters should then appear properly.
Code 39 Code Page

Interleaved 2 of 5

< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5
* On
Off

Check Digit

No Check Digit indicates that the imager reads and transmits bar code data with
or without a check digit.
3800g User's Guide 7 - 9