Table of Contents
Advertisement
Chapter 9
Emergency Operations
Emergency Alert are used to indicate critical situations. You can initiate an Emergency Alert at any
time even when there is activity on the current Talkgroup.
During the Emergency mode, any call launched is declared as Emergency Call.
9.1
Declaring Emergency
Procedure:
To declare emergency locally, press and hold the Emergency button.
The display shows a countdown from 3, 2, 1, and Declaring... with increasing tone. You can
release the Emergency button during the countdown to stop the process.
NOTE: You can also declare an Emergency remotely by an authorized user through WAVE
APP or a dispatcher but there is no countdown on display if done remotely.
If Emergency is declared successfully, your radio shows the following indications:
•
The Emergency tone sounds.
•
The amber LED illuminates.
•
The display shows Emergency.
NOTE: When the display flashes the Emergency icon, you are only allowed to view the info
screen, volume control, make an emergency call and exit the emergency mode.
If Emergency fails to declare, your radio returns to the previous screen.
9.2
Canceling Emergency
Procedure:
To cancel emergency locally, press and hold the Emergency button.
The display shows a countdown from 3, 2, 1, and Cancelling... with increasing tone. You can
release the Emergency button during the countdown to stop the process.
NOTE:
•
You can also cancel an Emergency remotely by an authorized user through WAVE APP or a
dispatcher but there is no countdown on display if done remotely.
•
Your radio can be configured that only an authorized user can exit emergency mode.
If Emergency is canceled successfully, your radio shows the following indications:
•
The Emergency tone sounds.
•
Returns to the previously selected Talkgroup.
•
Voice Announcement sounds.
If Emergency cancellation fails, your radio shows the following indications:
MN009326A01-AA
Emergency Operations
33
Advertisement
Table of Contents
