unless you are using a Plug and Play operating system such as Windows
this field to "manual" choose specific resources by going into each of the sub menu that
follows this field (a sub menu is preceded by a ">").
The settings are: Auto(ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
Please refer to section 3-9-1
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.
3-9-1 IRQ Resources
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
IRQ-3
assigned to
IRQ-4
assigned to
IRQ-5
assigned to
IRQ-7
assigned to
IRQ-9
assigned to
IRQ-10
assigned to
IRQ-11
assigned to
IRQ-12
assigned to
IRQ-14
assigned to
IRQ-15
assigned to
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
IRQ Resources
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
F6:Optimized Defaults
PC Health Status
32
®
95/98. If you set
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults