Transmitter Programming - Ultra Start 3295Series Installation Manual

95 SERIES
INSTALL MANUAL

TRANSMITTER PROGRAMMING

THE SYSTEM CAN LEARN UP TO 4 REMOTE TRANSMITTER. EACH REMOTE MUST BE
PROGRAMMED TOGETHER DURING THE SAME SEQUENCE. FOR SECURITY
REASONS ALL PREVIOUSLY PROGRAMMED TRANSMITTER WILL BE DELETED FROM
MEMORY.
ENTERING TRANSMITTER PROGRAM MODE
PROGRAMMING THE REMOTE'S
CYCLE THE IGNITION KEY- ON/OFF ON/OFF ON
(LEAVE THE KEY ON)
PRESS AND HOLD THE PROGRAM SWITCH. THE PARK LIGHTS WILL
TURN ON AND THE HORN WILL CHIRP 1 TIME.
CONTINUE TO HOLD THE PROGRAM SWITCH.
1 CHIRP CONFIRMS ENTERING PROGRAM MODE.
5 CHIRPS CONFIRMS TRANSMITTER PROGRAM MODE.
PRESS AND RELEASE THE LOCK BUTTON ON EACH ON THE
REMOTE'S TO BE PROGRAMMED
THE PARK LIGHTS WILL FLASH AND THE HORN WILL CHIRP EACH
TIME A NEW REMOTE CODE IS PROGRAMMED.
TURN THE KEY OFF TO EXIT PROGRAM MODE.
SYSTEM PROGRAMMING - Menu 1
TRANSMITTER PROGRAMMING
PAGE 28