Fault Codes - Ultra Start 3295Series Installation Manual

PAGE 29

FAULT CODES

SYSTEM PROGRAMMING - Menu 1
IF THE STARTER FAILS TO START THE REMOTE WILL DISPLAY A FAULT CODE ON THE
LCD DISPLAY. THE TEXT "FAULT" WILL BE FOLLOWED BY THE INPUT OR CONDITION
THAT IS CAUSE THE ISSUE
1
FAULT
1
FAULT
1
FAULT
1
FAULT
1
FAULT
BRAKE
TOGGLE
HOOD
TOGGLE
TACH
TOGGLE
VALET
TOGGLE
RANGE
TOGGLE
FAULT CODE VIA PAGER
BRAKE FAULT
1
THIS FAULT WOULD OCCUR IF
THE BRAKE THERE WAS AN
ISSUE WITH THE BRAKE
CIRCUIT.
HOOD FAULT
1
THIS FAULT WOULD OCCUR IF
THE HOOD WAS OPENED OR
THE HOOD SWITCH IS BROKE
OR OUT OF ALIGNMENT.
TACH FAULT
1
THIS FAULT WOULD OCCUR IF
THE VEHICLE HAD A START
ISSUE SUCH AS A DEFECTIVE
BYPASS MODULE.
VALET FAULT
1
THIS FAULT WOULD OCCUR IF
THE SYSTEM WAS IN VALET
AND YOU PRESSED START.
RANGE FAULT
1
THIS FAULT WOULD OCCUR IF
THE USER WAS OUT OF
OPERATING RANGE.
95 SERIES
INSTALL MANUAL