Ultra Start 3295Series Installation Manual page 22

95 SERIES
INSTALL MANUAL
SETTING 6- REMOTE STARTING
THE SIREN WILL CHIRP 6 TIMES WHEN SETTING 6 IS SELECTED
CHANGE SETTING 6 -
GOTO SETTING 7 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
SETTING 7- LED FLASHES
THE SIREN WILL CHIRP 7 TIMES WHEN SETTING 7 IS SELECTED
CHANGE SETTING 7 -
GOTO SETTING 1 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
ENTERING PROGRAM MODE 4
IGNITION KEY
ON/OFF - ON/OFF - ON
(Leaving the key ON)
SETTING 1- TACH OPTIONS
THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
CHANGE SETTING 1 -
GOTO SETTING 2 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 –TWO PRESSES- Press and release the start button two times to
activate the remote starter.
SETS OPTION 2 – ONE PRESS- Press and release the start button one time to
activate the remote starter.
SETS OPTION 3 – NEGATIVE PARK LIGHT- Negative output for park light flash
feature. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 –LEDS OFF- No LED flashes when the doors are locked/armed.
SETS OPTION 2 – LED FLASH- The LEDs flash when the doors are lock/ armed.
PROGRAM SWITCH
Press and release 1 time
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – HYBRID 1- The remote starter will ignore the Tach input after the
remote start activates.
SETS OPTION 2 – HYBRID 2- No Tach Learn required. The starter output will stay on
for 2 seconds then the remote starter will stay running for the programmed runtime.
SETS OPTION 3 –AUTO TACH LEARN- The system will automatically learns the
vehicles Tach. Tachless on TL Models. (DEFAULT)
SYSTEM PROGRAMMING - Menu 1
PROGRAM MODE
PRESS
6 CHIRP
1 TIME
PRESS
7 CHIRP
1 TIME
SYSTEM PROGRAMMING - Menu 1
SIREN CHIRP
1 CHIRP
Confirming
Program Mode
PRESS
1 CHIRP
1 TIME
PAGE 22
6X
7X
REMOTE BUTTON
Press Status
Button to
Select Menu 4
1X