Ultra Start 3295Series Installation Manual page 18

95 SERIES
INSTALL MANUAL
CON'T FROM PREVIOUS PAGE
SETTING 7- PASSIVE LOCKS
THE SIREN WILL CHIRP 8 TIMES WHEN SETTING 8 IS SELECTED
CHANGE SETTING 7 -
GOTO SETTING 8 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
SETTING 8- PASSIVE ARMING
THE SIREN WILL CHIRP 7 TIMES WHEN SETTING 7 IS SELECTED
CHANGE SETTING 8 -
GOTO SETTING 9 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
*The door pin connection must be made for passive arming to operate on the 3295 series.
SETTING 9- SHOCK & AUX SENSOR
THE SIREN WILL CHIRP 9 TIMES WHEN SETTING 9 IS SELECTED
CHANGE SETTING 9 -
GOTO SETTING 1 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 - PASSIVE LOCK DISABLED- The doors will not lock when
Passive Arming sets the alarm.
SETS OPTION 2 – PASSIVE LOCK ENABLED- The doors will lock when Passive
Arming set the alarm. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – PASSIVE ARMING ENABLED- The alarm will automatically arm
30 seconds after the last door is closed.
SETS OPTION 2 – PASSIVE REARM- The alarm will automatically arm 30 seconds
after unlock is pressed..
SETS OPTION 3 – PASSIVE ARMING DISABLED- The alarm will not
automatically. Must be armed by the remote. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – INTERNAL DISABLED- The Internal Sensor input will be Active
not be monitored when the alarm is armed.
SETS OPTION 2 – AUX DISABLED- The Auxiliary Sensor input will be Active not be
monitored when the alarm is armed.
SETS OPTION 3 – ENABLED- The Shock Sensor and Auxiliary Sensor input will
be Active when the alarm is armed. (DEFAULT)
*ALARM MODELS ONLY
SYSTEM PROGRAMMING - Menu 1
PROGRAM MODE
PRESS
7 CHIRP
1 TIME
PRESS
8 CHIRP
1 TIME
PRESS
9 CHIRP
1 TIME
PAGE 18
7X
8X
9X