Ultra Start 3295Series Installation Manual page 21

PAGE 21
PROGRAM MODE
SYSTEM PROGRAMMING - Menu 1
ENTERING PROGRAM MODE 3
SETTING 3-GAS/ DIESEL MODE
THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
CHANGE SETTING 3 -
GOTO SETTING 4 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
SETTING 4- RE-ARM OPTIONS
THE SIREN WILL CHIRP 4 TIMES WHEN SETTING 4 IS SELECTED
CHANGE SETTING 4 -
GOTO SETTING 5 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
SETTING 5- RUN TIME
THE SIREN WILL CHIRP 5 TIMES WHEN SETTING 5 IS SELECTED
CHANGE SETTING 5 -
GOTO SETTING 6 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
CON'T ON NEXT PAGE
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – NEGATIVE- The system will wait for the negative wait to start input
to turn off. (Starter will activate after 30seconds)
SETS OPTION 2 – 15 SECOND DELAY- The system will wait for 15 seconds before
activating the starter motor.
SETS OPTION 3 – GAS/POSITVE- If 12 volts present on the wait to start input
the system will wait for up to 30 seconds then start. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 - TYPE 2- The rearm output pulses only when the lock button is
pressed.
SETS OPTION 2 – AFTER START- The re-arm output will pulse after the remote
start starts the vehicle (DEFROST/ HEATED SEAT)
SETS OPTION 3 – REARM- Pulsed output when the doors are locked and after
remote start shutdown. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – 4 MINUTES- The system will run for approximately 4 minutes
then shut off.
SETS OPTION 2 – 45 MINUTES- The system will run for approximately 45 minutes
then shut off.
SETS OPTION 3 – 15 MINUTES- The system will run for approximately 15
minutes then shut off. (DEFAULT)
PRESS
3 CHIRP
1 TIME
PRESS
4 CHIRP
1 TIME
PRESS
5 CHIRP
1 TIME
95 SERIES
INSTALL MANUAL
3X
4X
5X