9.4
Adjusting Adjustable Angle Flip-Up Footplates
WARNING
When determining the angle of the footplates, make sure the rear of the footplates DO NOT interfere with the movement
of the front casters. Otherwise, injury or damage may occur.
Depth Adjustment
1.
Remove the two flat screws and locknuts that secure footplate to the half clamp.
Observe the angle of the footplate for reinstallation.
2.
Move the footplate to one of four mounting positions.
If desired depth is still not obtained, rotate the half clamp on the footplate hinge 180°.
Part No 1154295
Locknut
Footplate
Hinge
FIGURE 4 Installing Adjustable Angle Flip-Up Footplate Hinge
Footrest
Support
Tube
Socket Screw
39
Front Riggings
Solara 3G/Spree 3G Wheelchair