10.3 Removing/Installing and Using Flipback Armrests
Removing/Installing Flip Back Armrest
Removing
1.
Flip the armrest release lever to the unlocked position (Detail "A").
2.
Pull the quick release pin out of the rear arm socket.
3.
Pull up on the flip back armrest to remove from the front and rear
arm sockets.
4.
Repeat STEPS 1-3 for remaining flip back armrest, if necessary.
Installing
1.
Ensure that the armrest release lever is in the unlocked (horizontal)
position (Detail "A").
2.
Install flip back armrest into the front and rear arm sockets.
3.
Flip armrest release lever to the locked (vertical) position (Detail
"A").
4.
Install the quick release pin into the rear arm socket.
5.
Repeat STEPS 1-4 for remaining flip back armrest, if necessary.
Part No 1154295
Flip Back Armrest
Front Arm
Socket
Armrest
Release
Lever
Unlock
Position
(Horizontal)
FIGURE 3
Removing/Installing Flip Back Armrest
49
10 ARMS
Quick Release Pin
DETAIL "A"
Locked
Position
(Vertical)
Solara 3G/Spree 3G Wheelchair
Rear
Arm
Socket