Invacare Solara 3G User Manual page 67

Adjusting the Back Angle on Wheelchairs Equipped with Fold Down Back
1. Remove the mounting screw and locknut (not shown) that secures the backrest brackets to the adjuster plates and adjuster spacer.

One adjuster plate and one backrest brackets are located on each side of the adjuster spacer.
2. Repeat STEP 1 for the remaining back cane.
3. Adjust the back to the desired angle by aligning the mounting hole of the adjuster plates and adjuster spacer with the mounting hole of the
backrest brackets. The available back angles are 90
4. Secure the backrest brackets to the adjuster plates and adjuster spacer at the desired back angle with a mounting screw and locknut. Securely
tighten.
5. Repeat STEP 4 for the remaining back cane.
Locknut
(Not Shown)
Backrest
Bracket
Adjuster Spacer
Part No 1154295
°
, 95
Adjuster
Plate
Mounting
Screw
FIGURE 4 Adjusting the Back Angle on Wheelchairs Equipped with Fold Down Back
° ° ° ° ° °
, 100 , 105 , 110 , 115 , 120
Adjuster
Spacer
Backrest
Bracket
95°
105°
115°
67
(Detail "A").
Solara 3G/Spree 3G Wheelchair
11 BACK/SEAT
Adjuster
Plate
DETAIL "A"
90°
100°
110°
120°