Adjusting The Footplate Angle; Adjusting The Tension Of The Flip Up Footplate - Invacare Van Seat User Manual

6 ADJUSTMENT
6.4

Adjusting the Footplate Angle

1. Flip footplate up.
2. Screw the adjustment screw in or out until the desired angle is
achieved.
3. Repeat STEPS 1 and 2 for the other footplate.
6.5

Adjusting the Tension of the Flip Up Footplate

 The tension can be adjusted to increase or decrease
the rotation effort of the flip up footplates.
1. Loosen the mounting screw on the front rigging angle hinge to
decrease the rotation effort.

DO NOT remove the footplate mounting screw.
2. Tighten the front rigging angle hinge mounting screw to increase the
rotation effort.
3. Repeat STEPS 1 and 2 for the other footplate.
Invacare® Van Seat
FIGURE 5
Center Mount
Front Rigging
Mounting Screw
FIGURE 6 Adjusting the Tension of the Flip Up Footplate
34
Manual Center Mount
Footrest
Footplate
(shown away from Extension Tube)
Adjustment
Screw
Adjusting the Footplate Angle
Footplate
Part No 1143195