Table of Contents
Advertisement
6.6
Adjusting Armrests
WARNING
Pinch point may occur when adjusting the arm angle position (Detail "A").
Angle
For this procedure, refer to Detail "A" of FIGURE 7.
1.
Lift up the armrest.
2.
Loosen the jam nut.
3.
Adjust the socket screw up or down to the desired arm angle
position.
4.
Tighten the jam nut.
5.
To determine the same angle for the opposite armrest, count the
exposed threads after the jam nut has been tightened.
6.
Repeat STEPS 1-4 for opposite armrest, if necessary.
Height
For this procedure, refer to Detail "B" of FIGURE 7.
1.
Remove the socket screw that secures the armrest to the seat
frame assembly.
2.
Adjust the armrest to one of four positions.
3.
Reinstall the socket screw that secures the armrest to the seat
frame assembly and tighten securely.
Part No 1143195
DETAIL "A" - ANGLE
Armrest
DETAIL "B" - HEIGHT
Height Adjustment
Holes
Seat Frame
Assembly
Lock Knob
FIGURE 7
35
6 ADJUSTMENT
Adjustment
Screw
Jam Nut
Armrest
Adjusting Armrests
Invacare® Van Seat
Advertisement
Table of Contents
